본문 슬라이드 배너
본문 슬라이드 배너
레이텍 M16.0 x 1.5(H)
  • 레이텍 M16.0 x 1.5(H)

레이텍 M16.0 x 1.5(H)

공유
판매가
가격문의
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
3,500원 / 주문시결제(선결제) 조건별배송
택배
방문 수령지 : 경상남도 창원시 의창구 평산로 33(팔용동) 신화더플렉스시티 202호, 203호
상품코드
1867
자체상품코드
503807
브랜드
Leitech
제조사
Leitech
원산지
덴마크

상품상세정보

A BREAKTHROUGH IN THREAD DEPTH CONTROL

STOP counting turns
STOP buying expensive thread plugs with depth stops
These methods cannot compare with the accuracy and speed of the Leitech COMBI gage


Leitech COMBI gages consist of an anodized aluminum housing containing a telescoping measuring sleeve graduated in increments of either ;
INCH - .025" (standard), or .005" (HI-RESOLUTION)
METRIC - .5mm (standard), or 0.1mm (HI-RESOLUTION)

Qualify your functional "GO" size and check depth - all with one simple, quick, and truly cost effective gage. By using the Leitech COMBI thread depth gage, you eliminate the errors from depth steps and counting turns.

Only the Leitech COMBI thread depth gage can provide you with variable data on the depth of your tapped holes. SUBSTANTIAL savings in machine time can be realized by maintaining functional depth requirements this closely.

Companies who drill and tap large quantities of threaded holes daily which are 15% to 40% deeper than necessary to meet depth requirements are creating additional expense! Tool wear and breakage plus machine time increase dramatically.

When setting up a machine to cut threads, it is common practice to provide additional turns to allow for the drill point and the top crest, and to meet minimum thread length specifications. This is often checked by counting turns on a thread plus gage, or by using a bolt with a filed notch to act as a thread length guide.

This practice is costly and unnecessary, since a machining center is highly repeatitive - even to the point of drilling and tapping the extra thread length. This can be eliminated, or at least greatly reduced, with the right tools.

If your company produces 1000 tapped holes per day with a .070" depth allowance over minimum specifications - you can generate in one (1) year over 1400 feet of unnecessary and costly threads.

How many threads do you cut in a year?

By using the Leitech Combi Gage, companies reduce or eliminate this problem. The Leitech Combi Gage allows your machinist to adjust drilling and tapping depths precisely at set-up time. In addition, this depth can be monitored by the operator as the parts are produced. The Leitech Gage provides variable data. This reduces costs and allows you to be more competitive.

Cut your Inspection Time by One Half!

The Leitech Combi Gage allows you to qualify your minimum GO thread size and check length - all in one operation! Fast, and very cost effective. The measuring sleeve is graduated in .025 ins or 0.5 mm increments, and allows the direct reading of the length. It has been common practice to check thread hole depth by: 1) Counting turns, 2) using thread gages with depth steps or notches, and/or 3) using a bolt with a nut as a minimum depth check or a filed notch. None of these methods can compare with the accuracy and speed provided by the Leitech Combi Gage.

Leitech saves time. One of Europe's leading car manufacturers is checking a total of 99 blind threaded holes of 4 different thread sizes for depth and size. Using conventional thread gages, the inspection required 71 minutes. Leitech was able to reduce the time to 39 minutes, and also eliminated unnecessary gages.

One COMBI gage replaces 33 Gages with Depth Steps

Using conventional gages for blind holes, you need individual gages for each thread hole depth. This means a large inventory of different gages.The Leitech System provides the user with reduced inventory which saves time and money. Errors are reduced or eliminated. Often, a single Leitech Combi Gage can replace several different conventional gages with filed notches indicating minimum thread length .The result is less money tied up in gages and fewer errors.

Product Reliability cannot be compromised

In the automotive, aerospace and medical industries, the structural integrity of thread form and length of engagement are of paramount importance. Only Leitech with the direct reading length scale can provide the level of confidence necessary to satisfy the demanding requirements of these industries. Major aircraft and automotive companies ithroughout the globe use Leitech to insure the quality of their products.

Stocked in common inch and metric sizes. Capable of measuring depths at least 3 times the major diameter of the thread . Leitech Gages are manufactured to the high side of the tolerance to provide maximum wear. Replaceable gaging members made from the highest quality tool steel, hardened and stabilized to RC 60-62. Gaging members are manufactured on the latest Reishauer thread grinders, and calibrated on Zeiss optical and mechanical comparators. Certification of calibration is available at extra cost. Special sizes and pitch diameters can be manufactured to your specifications. Chrome and TiN coated members are available. The crest of the first full thread is held 1/2 pitch from the front face of the GO members (per H28 part 6). All gage handles are black anodized aluminum. Stainless steel bushing on the front of the measuring sleeve for longer wear.

배송안내

- 배송비 : 기본배송료는 3,500원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다)  100,000원 이상 구매시 무료배송입니다.

- 본 상품의 평균 배송일은 3일입니다. 단, 재고 유무에 따라 평균 배송일은 차이가 날 수 있으며, 배송일이 늦어질 경우 고객에게 직접 연락드리겠습니다. (입금 확인 후) 설치 상품의 경우 다소 늦어질수 있습니다.[배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.]

- 본 상품의 배송 가능일은 1일 입니다. 단, 재고 유무에 따라 배송 가능일은 차이가 날 수 있으며, 배송일이 늦어질 경우 고객에게 직접 연락드리겠습니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다. (단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)

교환 및 반품안내

- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.

- 저단가 상품, 일부 특가 상품은 고객 변심에 의한 교환, 반품은 고객께서 배송비를 부담하셔야 합니다(제품의 하자,배송오류는 제외)

- 일부 상품은 신모델 출시, 부품가격 변동 등 제조사 사정으로 가격이 변동될 수 있습니다.

- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.  

환불안내

- 상품 청약철회 가능기간은 상품 수령일로 부터 7일 이내 입니다.                

AS안내

- 소비자분쟁해결 기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.

- A/S는 판매자에게 문의하시기 바랍니다.

이미지 확대보기레이텍 M16.0 x 1.5(H)

레이텍 M16.0 x 1.5(H)
  • 레이텍 M16.0 x 1.5(H)
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

본문 슬라이드 배너
고객센터
  • 055-602-6190
  • 월~금 09:00 ~ 18:00
    토, 일요일, 국가 지정 공휴일 휴무
은행계좌 안내
  • 기업은행0556026190
  • 예금주 : (주)큐씨아이